Roger Lee Posted December 8, 2011 Report Share Posted December 8, 2011 Hi All, I just got through research and testing 5 Sensenich props of different lengths both 3 (68" and 65") and 2 blade (68" and 70") models. They were tested against a Warp Drive 66" and 3 blade (65") and a two blade Neuform. The bottom line no matter what the length or blade count so long as each blade was set at the same WOT rpm (5550 rpm flat and level) then they all performed the same. Same climb and same WOT speed. No one had any better performance one way or the other. There were a few different static rpm difference and even some difference in climb rpm, but the performance didn't change. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.