Bobby CAU Posted April 28, 2012 Report Share Posted April 28, 2012 recently my left EGT was reading quite bad thru the EMS, fluctuation is too much. does this due to probes sensors ? Link to comment Share on other sites More sharing options...
Roger Lee Posted April 29, 2012 Report Share Posted April 29, 2012 Hi Bobby, Is it just one probe? It can be a bad connection where they plug in. Did you do any maint. Just prior to this happening?It can certainly be a probe. They are about $30 from Dynon. It can also be the cloth header wrap if you have it? Link to comment Share on other sites More sharing options...
Jim Meade Posted April 29, 2012 Report Share Posted April 29, 2012 With me, it's the connectors that are bad. Crimping them a little sometimes helps. I need to upgrade my connectors. Link to comment Share on other sites More sharing options...
opticsguy Posted April 29, 2012 Report Share Posted April 29, 2012 I had the same problem after the rubber replacement. A crimped connector that had come loose. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.