Top Cat Posted April 6, 2015 Report Share Posted April 6, 2015 No, any upgrades are on hold at the moment, since I had to do unscheduled maintenance on the airplane's tail and my current avionics are working fine right now. As for the iPad, I find that it's plenty readable, though somewhat dim in certain conditions. It's never been to the point of unreadable. Might be different in a bubble like an RV-12 or Sky Arrow. Never had heat problems either. Look at post #22 for where mine is mounted. In that spot the pop-out vent blows air directly on the back of the iPad, which I'm sure helps a lot. Thanks Andy, Did you decide on the iFly yet? Quote Link to comment Share on other sites More sharing options...
ls6pilot Posted September 10, 2017 Report Share Posted September 10, 2017 Old topic but I would also be interested in what you used to block the top window etc. Rich Quote Link to comment Share on other sites More sharing options...
Chuckstur Posted May 27, 2020 Report Share Posted May 27, 2020 Here is what I learned this morning: the NEMA Port Controller in the iFLY would not launch if the Dynon was connected during boot up. If I booted with the Dynon disconnected I could connect it later and it would work. I made an adapter with male and female DB9 connectors with only the transmit and ground wires, and I could boot with the Dynon connected. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.