FlyingMonkey Posted December 2, 2018 Report Share Posted December 2, 2018 6 hours ago, Roger Lee said: Call me. It's easy. Takes 15-20 minutes. Will do, but will probably wait until I’m ready to do it, so I don’t forget in the meantime. Link to comment Share on other sites More sharing options...
BMcCand - N248CT Posted December 3, 2018 Report Share Posted December 3, 2018 KentWien: The turn-around for me was 1 month, but that included the Thanksgiving week. It is taking (I guess) another 2 weeks to get a replacement tube. For FlyingMonkey : http://flightdesignusa.com/support/sb-components/ has links to documents for SW and LS. Note there is an MRA to fill out and file with logs when removing the chute. (may not apply for E-LSA) Link to comment Share on other sites More sharing options...
FlyingMonkey Posted December 4, 2018 Report Share Posted December 4, 2018 On 12/3/2018 at 2:47 PM, BMcCand - N248CT said: For FlyingMonkey : http://flightdesignusa.com/support/sb-components/ has links to documents for SW and LS. Note there is an MRA to fill out and file with logs when removing the chute. (may not apply for E-LSA) I have an E-LSA, and never have to fill out an MRA. But thanks for the link! I'll at least look it over for factory guidance. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.