Bill3558 Posted July 24, 2020 Report Share Posted July 24, 2020 My flap control has started acting up. It’s fine at -6, 0, and 15, but when I select 30 or above, it will go there, but red and green lights are flashing next to the flap indicater numbers and the servo will stop and go like it’s hunting. Talked to FD , they say it’s either the $450 circuit board or the $20 switch. Will try the switch first but thought I’d run it by you guys. Many thanks. Quote Link to comment Share on other sites More sharing options...
Bill3558 Posted July 24, 2020 Author Report Share Posted July 24, 2020 See attached video. IMG_0546.MOV Quote Link to comment Share on other sites More sharing options...
Roger Lee Posted July 25, 2020 Report Share Posted July 25, 2020 Before I spent any money I would try to re-program it. That may or may not fix it, but that doesn't cost a bunch of money. I have fixed some like this before. If you buy a new board you'll still have to program it. Quote Link to comment Share on other sites More sharing options...
tennesseect Posted May 10, 2021 Report Share Posted May 10, 2021 ROger, I am having somewhat similar flap control problems. How does one re-program the flap control board? What do I need to have to do this? Quote Link to comment Share on other sites More sharing options...
Roger Lee Posted May 10, 2021 Report Share Posted May 10, 2021 7 hours ago, tennesseect said: ROger, I am having somewhat similar flap control problems. How does one re-program the flap control board? What do I need to have to do this? Give me a call. This will be much easier to explain and ask some questions. Quote Link to comment Share on other sites More sharing options...
Bill3558 Posted May 11, 2021 Author Report Share Posted May 11, 2021 Mine was doing the same thing. Reprogramming fixed it. Quote Link to comment Share on other sites More sharing options...
CTSW Bob Posted May 12, 2021 Report Share Posted May 12, 2021 I did this- Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.