Anticept Posted December 3, 2021 Report Share Posted December 3, 2021 My aircraft never had its fairings fitted. I need to drill the holes and mount them, but there's some oddities with them that make it kind of strange how they fit. I want to verify with some photos of others who have theirs installed. I need photos of how it fits around the landing gear leg, and the inside side of the landing gear near the wheels. That will give me what I need to know. Thanks! Quote Link to comment Share on other sites More sharing options...
Tom Baker Posted December 14, 2021 Report Share Posted December 14, 2021 Not 6.00x6, but fitting should be the same general idea. Quote Link to comment Share on other sites More sharing options...
Tip Posted December 14, 2021 Report Share Posted December 14, 2021 My ‘08 LS with factory tundras had brackets with 4 holes. Quote Link to comment Share on other sites More sharing options...
Anticept Posted December 15, 2021 Author Report Share Posted December 15, 2021 I was looking to see how loosely they fitted because mine have a rather large opening, and i can see that's standard. Thanks. Quote Link to comment Share on other sites More sharing options...
Tom Baker Posted December 15, 2021 Report Share Posted December 15, 2021 There is a fairly thick weather strip type material that is on the inside of the fairing where it wraps around the gearleg. Quote Link to comment Share on other sites More sharing options...
Anticept Posted December 15, 2021 Author Report Share Posted December 15, 2021 Yeah I have already fitted that too. Thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.