Eddie Cesnalis Posted July 28, 2022 Report Share Posted July 28, 2022 I know I can rotate them far enough to remove the float bowls. Can I rotate them a full 90 degrees so I can remove, clean and replace the needle and main jets. I'm thinking if I can get to 90 degrees they won't be falling out due to gravity as I'm trying to re-install them. Quote Link to comment Share on other sites More sharing options...
Anticept Posted July 28, 2022 Report Share Posted July 28, 2022 The limiter is the attached cables. Nothing inside the carb will stop you from rotating them. You will spill fuel from inside them though and it might wash debris into places you don't want. I just take the screws off the hats and lift those off, and take off the throttle and choke arms. Then carb comes right off. Quote Link to comment Share on other sites More sharing options...
Roger Lee Posted July 28, 2022 Report Share Posted July 28, 2022 Hi Ed, Give me a call it will be a lot easier. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.