Tom Baker Posted January 27, 2021 Report Share Posted January 27, 2021 You can feel the hose through the firesleeve. Quote Link to comment Share on other sites More sharing options...
Isham Posted January 27, 2021 Report Share Posted January 27, 2021 Okay. I will do that next trip to the hangar. It's too cold here in Kansas, no heat, no work on airplane. Quote Link to comment Share on other sites More sharing options...
Roger Lee Posted January 27, 2021 Report Share Posted January 27, 2021 Tom's is similar to mine. I have one like tom's as a backup, but it is much harder to use. I like my Band-It Pok-It tool. It works easily and cuts easily. Then I grab the tail that's left over after the cut with a pair of needle nose pliers and roll the sharp edge over. It won't cut ot scrape you after that. Quote Link to comment Share on other sites More sharing options...
Tom Baker Posted January 27, 2021 Report Share Posted January 27, 2021 I don't use mine as it is shown in the picture. I remove the rod handle, and drive the hex with a small battery powered driver. Quote Link to comment Share on other sites More sharing options...
GrassStripFlyBoy Posted January 27, 2021 Report Share Posted January 27, 2021 Professional Grade CV Boot Clamp Banding Tool | eBay Bought this one Quote Link to comment Share on other sites More sharing options...
Roger Lee Posted January 27, 2021 Report Share Posted January 27, 2021 33 minutes ago, GrassStripFlyBoy said: Professional Grade CV Boot Clamp Banding Tool | eBay Bought this one Same one I have. Quote Link to comment Share on other sites More sharing options...
FlyingMonkey Posted January 28, 2021 Report Share Posted January 28, 2021 On 1/27/2021 at 9:08 AM, Roger Lee said: Same one I have. Purchased! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.