shiny.ice Posted November 25 Report Share Posted November 25 What does your physical flap angle look like when your CTLS flaps are set to -6°? Here's mine: And here's mine at 0°: I'm especially curious about the CTLS with the -6° flap setting. I know the earlier models with -12° will look different. Quote Link to comment Share on other sites More sharing options...
Roger Lee Posted November 25 Report Share Posted November 25 Zero flaps should be equal to the fuselage and -6 should be approx. 1.25" (?) above the fuselage. If these are teir positions right now you probably need to reprogram the flaps. Quote Link to comment Share on other sites More sharing options...
Skunkworks85 Posted November 26 Report Share Posted November 26 -6° should be a measured angle from the zero position. Quote Link to comment Share on other sites More sharing options...
shiny.ice Posted November 26 Author Report Share Posted November 26 I was just coming back here to post a screenshot of that, showing the flush flaps at 0°. I think my problem is the potentiometer, not the flap controller. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.