Roger Lee Posted November 15, 2012 Report Share Posted November 15, 2012 Here are the three Rotax manuals that were just updated. Operators Manual (OM) 912 Series, Edition 3. Line Maintenance Manual (LMM) 912 Series, Edition 3. Installation Manual (IM) 912 Series, Edition 2. Here is the page download link: http://www.rotax-owner.com/support-bulletin/engine-manuals Link to comment Share on other sites More sharing options...
Roger Lee Posted November 15, 2012 Author Report Share Posted November 15, 2012 Here are the main changes. There are two notable changes! They are in the Line Maint. manual. Rotax Operators Manual 3.pdf Rotax Line Maint1.pdf Rotax Line Maint2.pdf Rotax Line Maint.pdf Rotax Operators Manual 2.pdf Link to comment Share on other sites More sharing options...
sandpiper Posted November 16, 2012 Report Share Posted November 16, 2012 So now we have to replace the fuel pump after 5 years?? Link to comment Share on other sites More sharing options...
Roger Lee Posted November 16, 2012 Author Report Share Posted November 16, 2012 Hi John, I knew you would be excited! :wacko: As far as I'm concerned, if the pump is good leave it alone. Yes it does say to change it, but that I'm sure is because they have had a number of issues with the old pumps. You can usually see when it is starting to go bad and if you have a good pump they tend to last a long time, but we will have to see with these new pumps. Link to comment Share on other sites More sharing options...
Mike Posted November 16, 2012 Report Share Posted November 16, 2012 We have had a few more failures in the UK one pump at around 1600 hrs and another around 600 hrs Mike Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.