Roger Lee Posted November 23, 2012 Report Share Posted November 23, 2012 Hi All, For those of you that have a Dynon D120 and have an oil temp fluctuation, here is a software fix. Down load it, then on your laptop at the hangar and when in the Dynon Support program and when it ask what to upload pick other backup file and then just select the file on your laptop. Then go into the setup on the D120 and under type of ID sensor it will say #1. Use the select button and select #11. I have been testing it and my oil temp is solid. Link to comment Share on other sites More sharing options...
S3flyer Posted November 24, 2012 Report Share Posted November 24, 2012 Hi Roger, Is this a special patch from Dynon and/or is it included with a specific release (5.4.x)? Link to comment Share on other sites More sharing options...
Roger Lee Posted November 24, 2012 Author Report Share Posted November 24, 2012 It was given to three people in the US to try from Dynon. It works well. Maybe someday they will put it in a download update. Right now it is a single specific fix that only we have. I'm working on the ammeter fluctuation fix no. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.