Adam Posted March 12, 2013 Report Share Posted March 12, 2013 We have been talking about this in other threads. Thought I'd share the official release of Flight Design's Safety Alert for all CT's with Rotax engines. This does not impact fuel injected CTLSi Rotax engines. While the serial numbers are all recent (Roger was guessing last 12 months) it is required of all CT's that have had an engine change since original factory delivery. FD doesn't know who may have had a replacement engine installed and what S/N may have been put in. You must note in your logbook compliance with the Safety Alert if you have had an engine change. Safety Alert.pdf Rotax.pdf Link to comment Share on other sites More sharing options...
Roger Lee Posted March 12, 2013 Report Share Posted March 12, 2013 I can tell you that all these engines come after March of 2012. I know because I installed a new engine then and its serial number is 300 engines too low. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.