mocfly Posted March 19, 2013 Report Share Posted March 19, 2013 What would be required to repair this damage? Link to comment Share on other sites More sharing options...
mocfly Posted March 19, 2013 Author Report Share Posted March 19, 2013 Here is the picture. Link to comment Share on other sites More sharing options...
Roger Lee Posted March 19, 2013 Report Share Posted March 19, 2013 A little Aeropoxy with some glass bubbles. It isn't structural, just cosmetic. Fill it, then sand it smooth and re-paint. Link to comment Share on other sites More sharing options...
mocfly Posted March 19, 2013 Author Report Share Posted March 19, 2013 Thanks Roger Link to comment Share on other sites More sharing options...
Runtoeat Posted March 19, 2013 Report Share Posted March 19, 2013 I'll add a thought on this. I had a repair done in this area near the fuel filler. The paint used was the rattle can that comes from the factory. This was not fuel resistant and it crazed from the fumes. The area had to be repainted with 2 part paint which is resistant to solvents. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.