paul m Posted April 8, 2013 Report Share Posted April 8, 2013 I think we're getting closer to Adam's vision. Dynon today announced a new Comm (SV-Com-C25) and an Intercom (SV-Intercom-2S), as well as Skyview 6.0. Available in June. Link to comment Share on other sites More sharing options...
techman Posted June 1, 2013 Report Share Posted June 1, 2013 Has anyone updated to Skyview v 6.0? Link to comment Share on other sites More sharing options...
Doug G. Posted June 1, 2013 Report Share Posted June 1, 2013 I have it downloaded and will install in tomorrow. Link to comment Share on other sites More sharing options...
coppercity Posted June 1, 2013 Report Share Posted June 1, 2013 Installed today, will test fly tomorrow. Link to comment Share on other sites More sharing options...
NC Bill Posted June 1, 2013 Report Share Posted June 1, 2013 Has anyone updated to Skyview v 6.0? UPDATED to v6.0 without incident. I have TruTrac a/p and SL-40 radio so can't speak as to that part of the program. FYI for those who have not done a FIRMWARE update before - remember both panels must be updated separately. Link to comment Share on other sites More sharing options...
coppercity Posted June 2, 2013 Report Share Posted June 2, 2013 Had to re-tune the Dynon AP after upgrade, I would suggest recording your gains and sensitivity settings prior to upgrading. The autopilot control changed, there are now a simplified controls or you switch to the expert controls which are nice. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.