FlyingMonkey Posted December 1, 2013 Report Share Posted December 1, 2013 Hey all...I have a machinist friend who is going to be starting a side business producing metal aviation art. He uses sheet steel on a programmable plasma cutter. He uses a photograph of the subject, adds color by heat treating and can make surrounding graphics to suit (within reason). As a test he did the following for me, it's about 16" across I think (I have not measured, estimating): If anybody else is interested in something like this for your home or hangar, let me know by private message and I can pass your information along to him. I don't know what the exact cost will be, but I'm guessing from our conversation he's going to charge $50-60 for them. The quality is very nice and the cut images are quite true to the photo provided. Link to comment Share on other sites More sharing options...
Duane Jefts Posted December 1, 2013 Report Share Posted December 1, 2013 Nice! Link to comment Share on other sites More sharing options...
S3flyer Posted December 4, 2013 Report Share Posted December 4, 2013 Or you can get Rotax furniture: https://scontent-a-dfw.xx.fbcdn.net/hphotos-prn2/1470041_547055818713911_567602260_n.jpg Link to comment Share on other sites More sharing options...
FlyingMonkey Posted December 4, 2013 Author Report Share Posted December 4, 2013 Or you can get Rotax furniture: https://scontent-a-d...567602260_n.jpg That is awesome, but probably costs more! Link to comment Share on other sites More sharing options...
paul m Posted December 4, 2013 Report Share Posted December 4, 2013 Good to see they used a fuel injected engine. Too many problems with a carburated coffee table. Of course its useful load is reduced..... Link to comment Share on other sites More sharing options...
Mike Posted December 5, 2013 Report Share Posted December 5, 2013 thats a expensive coffee table :>) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.