FlyingMonkey Posted March 19, 2014 Report Posted March 19, 2014 Hey all... Here's a weird one...I had the tip (everything ahead of the first plastic ring) of an audio cable break off *inside* the audio in jack on my CT's panel. I tried fishing the busted part out with needle nose pliers and tweezers, no joy. Looking at the backside, there are a lot of wires going into the jack and a big glob of clear silicone holding it all in place. How hard would this be to replace? I don't really listen to music in flight, but might like to on longer flights and might also like to plug my iPad into it for terrain and obstacle alerts, etc. Ideas?
Anticept Posted March 19, 2014 Report Posted March 19, 2014 Put a *tiny* dab of quick drying superglue on the tip of a rod, and push it down in. Wait for it to dry, and withdraw the broken tip. You must absolutely use a tiny bit. You don't want to leave a glob in the jack, or now you will have a stuck rod.
FastEddieB Posted March 20, 2014 Report Posted March 20, 2014 If that doesn't work, I have both a propane torch and a ShopVac at my hangar. I'm sure we can some up with something!
chanik Posted March 20, 2014 Report Posted March 20, 2014 It's a basic mono 3.5mm jack http://www.digikey.com/product-detail/en/35PM2A/SC1456-ND/1288954
Skywalker Posted June 24, 2014 Report Posted June 24, 2014 Having trouble with mic intermittently cutting out .Im told that it may be shorting out .It is in 2008 ctls and I believe its the 40 .Any thoughts . Also when I bought the plane there was a white strip of what appears to be white tape across the length of the horizontal stabilizer.A small part came up in a heavy rain and there doesn't appear to be anything beneath it . Ideas?
Tom Baker Posted June 24, 2014 Report Posted June 24, 2014 On the LS it has a built in Kevlar living hinge that is painted over. The tape is not needed, but will help keep the paint from cracking when the hinge moves.
Doug G. Posted June 24, 2014 Report Posted June 24, 2014 I don't know who put it there, but my 2010 has the tape. I suspect it came from FD that way.
Anticept Posted June 24, 2014 Report Posted June 24, 2014 Tape on both of ours too. It's purpose is so that nobody freaks out thinking their anti-servo trim tab is going to fall off due to the hairline cracks that are present in the paint.
Doug G. Posted June 24, 2014 Report Posted June 24, 2014 I wonder if FD calls it anti-freak out tape. :-)
FlyingMonkey Posted June 25, 2014 Author Report Posted June 25, 2014 I thought all the CTs have the hinge between the stabilizer and the trim anti-servo tab taped... My 2007 CTSW does.
FlyingMonkey Posted June 25, 2014 Author Report Posted June 25, 2014 My CT has a stabilator. I think we all know what I meant.
Tom Baker Posted June 25, 2014 Report Posted June 25, 2014 I thought all the CTs have the hinge between the stabilizer and the trim anti-servo tab taped... My 2007 CTSW does. The way the CTLS is done is different than the CTSW.
FlyingMonkey Posted June 25, 2014 Author Report Posted June 25, 2014 The way the CTLS is done is different than the CTSW. Well that 'splains it! It doesn't have a full span anti-servo tab? Or is it just attached differently?
Tom Baker Posted June 25, 2014 Report Posted June 25, 2014 Well that 'splains it! It doesn't have a full span anti-servo tab? Or is it just attached differently?Both. It has a Kevlar hinge molded into the structure, which lets the paint flex when the trim tab moves.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.