Jump to content

Dynon EGT probe location


Roger Lee

Recommended Posts

Hi All,

 

Here is the correct location for the EGT probes in the exhaust pipe. It is 100mm or 3.93 " from the exhaust outlet on the head. I have seen a few that must have been installed after they came into the US and were either too close or too far away from the correct location. This has a serious effect on the correct EGT's. Located anywhere, but where they are supposed to be and your EGT temps are trashed. If they happen to be in the wrong place this is an easy fix. Just weld over the old hole and drill the new hole in the proper place and remount the probe.

EGT probe location.pdf

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...