Bobby CAU Posted September 25, 2014 Report Posted September 25, 2014 dear CTFlier, i attached photo i took from my EMS D120 Dynon who the oil temp has blank some part, anyone will advise what is this caused?. firmware need to upgrade?.
Anticept Posted September 25, 2014 Report Posted September 25, 2014 The bar turns green once you hit the upper arc of it. Basically, it is a reminder to bring the engine to operating temp to condition the oil and remove moisture.
Bobby CAU Posted September 25, 2014 Author Report Posted September 25, 2014 The bar turns green once you hit the upper arc of it. Basically, it is a reminder to bring the engine to operating temp to condition the oil and remove moisture. thanks ...
Bobby CAU Posted September 25, 2014 Author Report Posted September 25, 2014 This isn't a defect. It is normal. It is an area just open with no color as the temp rises to the green normal operating temp. The temp is only 176F (80C) which is below the normal operating oil temp Rotax would like to see. thanks Roger !!
Recommended Posts
Archived
This topic is now archived and is closed to further replies.