FlyingMonkey Posted July 21, 2015 Report Share Posted July 21, 2015 Hello all... Well, Craig and I made it to Oshkosh! We left Saturday morning with our friends Kip (in his Waiex: Y-tailed Sonex) and Joerg (in his Vari-EZ). I'm used to being the fast flyer among my regular flying buddies, but I was definitely the slowpoke here. They were happy to throttle back and save some gas though. Kip is the seasoned veteran of the group, he flies business jets for a living and has flown his little Waiex to every one of the lower 48 states. Hislane also has the shortest legs with only 17 gallons, so we let him pick the fuel stops. We flew about two hour legs. It was very hot, so we generally climbed up and cruised at 6500-8500ft. To keep up with the other airplanes, I ran 5400-5500rpm the entire flight. The engine had absolutely zero problems with that, and didn't hiccup once. Oil temps were very steady at 230F in cruise and 235-242F in climb. Because I had two people up and was running right at gross weight, performance was a bit low. I normally see about 110kt at 5200rpm, and we were getting 113kt at 5500rpm. The weather was a little crusty on our route, and after our second fuel stop at Kankakee, IL (IKK), the weather started closing in on the east and the winds picked up, so we made a dash to the west to try to get on the back side of the weather. We were trying for Davenport, Iowa. When we got there, Kip was a few miles ahead and attempted a landing on runway 21. Winds were 270@14G18. Kip ran out of rudder authority with that much crosswind, so he broke off the approach, and we decided to divert to Quad City(MLI), a Class C just south with a runway 27. I had never done any class C ops, so Kip talked me through the approach/clearance delivery procedure, and I just did as he did. He and Joerg were several miles ahead and made right base to 27 and landed uneventfully. Then it was my turn. But of course they didn't want to make it easy on me, so instead of just making right base like Kip and Joerg, ATC had me fly heading 180 when I was about five miles out. Then when I was a mile or two from being aligned with the runway, ATC asked me to make a right turn to 170. Well, 170 was ten degrees to my LEFT, so I responded "say again heading for 509CT?". He repeated "turn right heading 170". Okay. I start making a right 350 degree turn. Halfway through the turn ATC comes on with "509CT I am now showing you northbound. Say intentions." I responded with "My intention is to make a right turn to heading 170 per instructions." He came back with "Oh, sorry about that, I meant for you to make a left turn." Ha! No harm, no foul, I rolled out on 170. Then I was cleared to land on 270, but wind was up to 20G24, right down the runway. I had never landed in that much wind. I just made a normal approach, about two miles on final. When we got close we saw there were two airliners stacked up holding short for our arrival. My ground speed was probably 40kt, I bet those pilots were either annoyed or very amused. I used 15 flaps and actually made a good landing with no drama. A shout out to Elliot Aviation. Their line guys were super friendly, and bent over backwards giving us hangar space for the night and came in earlier than their normal opening the next morning to get us out early! We got going for the final push to Oshkosh the next day. The published Fisk approach was actually pretty easy and uneventful. Winds were 300@9, using runways 27 and 36. Kip was assigned 36, and requested 27, which was approved. I did the same a few minutes later, and was told "unable, I need you landing 36." Oh well. I made the approach and was to,d to land on the yellow dot, halfway down the runway. The winds were less than forecast, and I touched down dead center on the runway about five feet long of the dot. Good enough. They taxied me to hell and creation, I bet we taxied four miles (mostly in high, rough grass) to general aviation parking. I checked to make sure all my fillings were intact after the long rough taxi, then tied down. We made it! I will put up some pics when I have some more time, and when I get the pics my travel companions took. Link to comment Share on other sites More sharing options...
paul m Posted July 21, 2015 Report Share Posted July 21, 2015 Great job Andy. Hope you have a fabulous time there. Link to comment Share on other sites More sharing options...
Anticept Posted July 21, 2015 Report Share Posted July 21, 2015 Make sure you are well tied down. Oshkosh has had a bad record the past few years with storms and microbursts tearing the field up and trashing things. Last week They had some high winds that damaged a couple planes out there in the displays. http://www.aopa.org/News-and-Video/All-News/2015/July/18/Powerful-storm-hits-Oshkosh-in-advance-of-AirVenture Link to comment Share on other sites More sharing options...
FastEddieB Posted July 21, 2015 Report Share Posted July 21, 2015 Spread those wings, grasshopper! Show those naysayers that a CT is good for more than trips around the pattern! Link to comment Share on other sites More sharing options...
Runtoeat Posted July 21, 2015 Report Share Posted July 21, 2015 Nice going Andy. Great job flying while under duress. Good report! Link to comment Share on other sites More sharing options...
FlyingMonkey Posted July 22, 2015 Author Report Share Posted July 22, 2015 Make sure you are well tied down. Oshkosh has had a bad record the past few years with storms and microbursts tearing the field up and trashing things. Last week They had some high winds that damaged a couple planes out there in the displays. http://www.aopa.org/News-and-Video/All-News/2015/July/18/Powerful-storm-hits-Oshkosh-in-advance-of-AirVenture Definitely. We rechecked it after some weather moved though with 30kt winds. All good. Link to comment Share on other sites More sharing options...
jackwhickman Posted July 22, 2015 Report Share Posted July 22, 2015 Welcome to Oskosh. I arrived Friday from Albuquerque, one day flight in my recently acquired 2006 CTSW. I taxied even further, nose wheel covered with grass stain. I am parked on the last GAP row next to Basler FBO. My first trip to Oshkosh in a CT. I was tied down well and survivied the Saterday morning storm that did some local damage. Link to comment Share on other sites More sharing options...
FlyingMonkey Posted July 22, 2015 Author Report Share Posted July 22, 2015 Welcome to Oskosh. I arrived Friday from Albuquerque, one day flight in my recently acquired 2006 CTSW. I taxied even further, nose wheel covered with grass stain. I am parked on the last GAP row next to Basler FBO. My first trip to Oshkosh in a CT. I was tied down well and survivied the Saterday morning storm that did some local damage. Hey Jack, I'm in row 634, very close to there. There is a CTSW across the row from me, is that you? Link to comment Share on other sites More sharing options...
opticsguy Posted July 22, 2015 Report Share Posted July 22, 2015 Too bad they destroyed most of the camping next to the ultralight barn. I used to fly in to the UL strip, push my plane 50 yards and camp. Now I drive to Airventure. Great camping WX so far. Link to comment Share on other sites More sharing options...
gbigs Posted July 22, 2015 Report Share Posted July 22, 2015 Piper Malibu Crash Temporarily Closes Oshkosh Five aboard taken to local hospital. Link to comment Share on other sites More sharing options...
jackwhickman Posted July 23, 2015 Report Share Posted July 23, 2015 Andy I forget what row I am in. But if you walk east toward Basler, I am on the north end of the last row before you get to Basler. I am staying at UWO, plan to start home Friday morning. Link to comment Share on other sites More sharing options...
Tom Baker Posted July 24, 2015 Report Share Posted July 24, 2015 Andy, been here since Sunday. I spend some time around the CT booth, but have spent more time wondering around this year. Link to comment Share on other sites More sharing options...
FlyingMonkey Posted July 25, 2015 Author Report Share Posted July 25, 2015 We made it home today. We left about 6:45am and arrived home at 2pm. We got away from OSH and landed at Pontiac, IL (PNT) for fuel. There is nothing there but corn and ag planes. We had to wait a while there because their fuel truck ran out of fuel (irony!). To get over the persistent heavy scattered layer we had to climb to 7500ft, and eventually to 9500ft. Once up there and making good time, we wanted to milk it. Also, there was forecast possible thunderstorms building in TN and GA, and we wanted to get home before they could mature. So we skipped our planned lunch stop, and only made the one stop. The last leg was 486 nautical miles, and took about 4.1 hours. That averages to 118kt ground speed. What a machine the CT is! We got on the ground just as the weather was starting to look more menacing, so great timing there. There was no drama or high winds like flying up there, so overall just a fun, relaxing trip. We used flight following the entire route. Now, to sleep about 12 hours... Link to comment Share on other sites More sharing options...
Rich Posted July 25, 2015 Report Share Posted July 25, 2015 Congrats on the safe trip Andy. Link to comment Share on other sites More sharing options...
IrishAl Posted July 25, 2015 Report Share Posted July 25, 2015 Thanks for the report - I really enjoyed it. Link to comment Share on other sites More sharing options...
FlyingMonkey Posted July 28, 2015 Author Report Share Posted July 28, 2015 Here's one Kip took from his Waiex somewhere over Illinois: Link to comment Share on other sites More sharing options...
FlyingMonkey Posted August 4, 2015 Author Report Share Posted August 4, 2015 Here's another of my CT, taken from Joerg's Vari-EZ (canard visible far left), also showing Kip below in his Waiex: That one really shows off the bulbous lines of the CT. Not sleek by any means, but we love 'em anyway! Link to comment Share on other sites More sharing options...
Anticept Posted August 4, 2015 Report Share Posted August 4, 2015 I like the bulbous lines, and they transition smoothly, so I think they ARE sleek. They look like a little baby plane that should have appeared in Disney's Planes. And I like the stubbyness of the SWs. Makes them look silly in a cute way! Link to comment Share on other sites More sharing options...
FlyingMonkey Posted August 4, 2015 Author Report Share Posted August 4, 2015 I like the bulbous lines, and they transition smoothly, so I think they ARE sleek. They look like a little baby plane that should have appeared in Disney's Planes. And I like the stubbyness of the SWs. Makes them look silly in a cute way! That is the upside, Corey. Every woman who has ever seen my airplane has said "Oh my, it's so CUTE!!!" So, at least chicks dig it. Link to comment Share on other sites More sharing options...
FlyingMonkey Posted August 5, 2015 Author Report Share Posted August 5, 2015 Here's our last leg on FF in FlightAware. The autopilot flies a very boring, straight line. http://flightaware.com/live/flight/N509CT/history/20150724/1452Z/1C1/KWDR Link to comment Share on other sites More sharing options...
Doug G. Posted August 7, 2015 Report Share Posted August 7, 2015 Ha! Much better than one that posed a random heading every ten minutes our so. ???? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.