procharger Posted March 15, 2016 Report Share Posted March 15, 2016 What else do I need to wire the extra 12volt wires from the modules, someone told me to get part numbers 265210 265275 260130 are the parts to add extra wire to the plugs? Pin connectors? Link to comment Share on other sites More sharing options...
FastEddieB Posted March 15, 2016 Report Share Posted March 15, 2016 Everything I needed came with the modules, except for the actual wire to run to the starter solenoid. That wire can be relatively thin gauge - it only serves to provide a 12v signal, carrying very little current. Link to comment Share on other sites More sharing options...
Roger Lee Posted March 16, 2016 Report Share Posted March 16, 2016 All you need is wire and two wire end crimp connectors to go into the plug. Down at the solenoid just cut off the existing spade connector that attaches to the center post and crimp that wire and the two from the plugs on top together. Your done. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.