Al Downs Posted May 31, 2016 Report Posted May 31, 2016 Someone changed a setting and I can't find it in the menu or the book. I don't know what it means but would like to set it back the way it was. In the picture you can see readings for MX CR and MN. Do you know how to change this?
FlyingMonkey Posted May 31, 2016 Report Posted May 31, 2016 It's the G-meter reading. In the menus it's under "info" and in this case the "left" setting. You can keep hitting the button to cycle through the modes (OAT/TAS/DA, G-meter, System Voltage, Vertical Speed, and None). In this case the MN is minimum G since the system was reset by user, CR is current G (should read 1.0 on the ground), MX is maximum G since last user reset.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.