Roger Lee Posted June 19, 2010 Report Share Posted June 19, 2010 Firewall Blanket Mod If you have had the firewall blanket mod done make sure you re-torque the engine mount bolts through the firewall (6 of them) after a month or two. The firewall and engine bracket seems to settle in some after a while. If your voltage meter (Dynon guys) seems to be going down over time after the blanket install then check the torque on the right side where the ground wires hook up at the frame. Put a wrench on anything that goes through the firewall afetr the blanket install whether you think it is tight or not. ESPECIALLY the GROUNDS Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.