NC Bill Posted July 2, 2016 Report Posted July 2, 2016 The Serial Data Format is set to "GARMIN DATA TRANSFER" What would be the correct "GDL-39 PASS-THROUGH SERIAL FORMAT" to enter on the 696 Interface Setup?
Anticept Posted July 2, 2016 Report Posted July 2, 2016 Are you trying to communicate with other avionics? If so, you need to research what protocols those other units use. It also matters how you wired things up. What is the GDL 39 connected to? Just the 696, or is it also wired to something else via the pass through serial connection? The answer I give you depends on what is wired.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.