Al Downs Posted June 3, 2017 Report Share Posted June 3, 2017 Started getting cht alarms last week. Obviously a false alarm according to the other readings so replaced the sensor and adjust the terminal for a tight fit. it would come and go. Never a high reading but would be lost totally, It was good for 3 days and today it started again. Identical reading and trouble. I can change the sensor again but would like to know what the problem might be. Could it be a ground problem? Link to comment Share on other sites More sharing options...
Roger Lee Posted June 4, 2017 Report Share Posted June 4, 2017 To check the signal and probe swap the CHT with the oil temp wires. If it acts up in the swapped position then its a loose wire. This is my guess as to the problem. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.