ls6pilot Posted January 31, 2018 Report Posted January 31, 2018 Need one of these little l brackets. Any one know part number . Looks like it would be easy to make. thanks Rich
Anticept Posted February 1, 2018 Report Posted February 1, 2018 Just bend a piece of thick aluminum sheet. Those are pop rivets holding them on, and the camloc recievers can be ordered from aircraft spruce (c-spec series 2000 steel, made by milspec products)
Runtoeat Posted February 1, 2018 Report Posted February 1, 2018 Corey solved that problem. It appears that your front strut is installed but there's no wheel pant. Just curious, do you fly without wheel pants?
ls6pilot Posted February 1, 2018 Author Report Posted February 1, 2018 Actually that's not my plane. That is a ct fuselage that Lockwood aviation uses to teach the rotax classes. I took the first 2 day course this mon and tues. I just noticed those pieces and took a picture. One of mine has broken. I thought the course was very well done. ( I do fly without the main wheel pants, but the front pant/pants? is on my plane)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.