DJ Todd B Posted May 30, 2018 Report Share Posted May 30, 2018 I have a few chips and put some Epoxy on them but need some paint for touch-up. Anyone know what type and where to get the paint? Link to comment Share on other sites More sharing options...
Anticept Posted May 30, 2018 Report Share Posted May 30, 2018 It's an acrylic urethane paint. You can take the top cowling off, clean it up real well, and take it to an automotive paint shop so they can color match. Tell them you are doing touchups. PPG concept was the last paint I used. Link to comment Share on other sites More sharing options...
WmInce Posted May 30, 2018 Report Share Posted May 30, 2018 1 hour ago, Anticept said: PPG concept was the last paint I used. Corey, Is that a 2-stage paint? Could you say you were satisfied with that paint? Link to comment Share on other sites More sharing options...
Anticept Posted May 30, 2018 Report Share Posted May 30, 2018 It works fine. Don't do clearcoats for an airplane. They don't stand up well to the environment airplanes fly in, and will look awful after a while. PPG concept works fine as a single stage. Link to comment Share on other sites More sharing options...
ls6pilot Posted May 30, 2018 Report Share Posted May 30, 2018 This is the color. RAL 9016 Traffic white ral 9016. I got some from finish master in Augusta GA. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.