Jump to content

Header heat insulation?


Recommended Posts

Go to just about any auto parts store or performance shop such as Summit Racing Equipment. Buy 2" wide by at least 15' long. This is the minimum length that will cover all 4 pipes. I started mine at the top , made one wrap, then used a SS hose clamp to hold it. You then continue down with about a 3/8" overlap until you reach the muffler. Use another SS hose clamp to keep the wrap from unraveling and then use the same procedure to wrap the other 3 pipes. Take your time and you should have no trouble doing this. I think it helps keep the heat under the cowling down and may increase the heat that goes to the cabin. 

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...