Al Downs Posted March 13, 2019 Report Share Posted March 13, 2019 Share your thoughts When it comes time for the Nueform prop inspection it needs to be sent in. It takes at least 2 weeks and cost about $1000. Are some of the other makes just as good? I know the others do not cost that much for the needed inspections. A lot of the inspection cost could go towards a new prop. Link to comment Share on other sites More sharing options...
cdarza Posted March 13, 2019 Report Share Posted March 13, 2019 I bought a new prop (Sensenich) and kept the Nueform as wall decor. Cant justify the 1k inspection/repair. Link to comment Share on other sites More sharing options...
Ed Cesnalis Posted March 13, 2019 Report Share Posted March 13, 2019 I bought my current prop (big chip missing on trailing edge) from Roger. I talked him down to $300 if I remeber My CT goes over 125kts true on a cheap low tech prop. Link to comment Share on other sites More sharing options...
Al Downs Posted March 13, 2019 Author Report Share Posted March 13, 2019 What are you using now Link to comment Share on other sites More sharing options...
Ed Cesnalis Posted March 13, 2019 Report Share Posted March 13, 2019 Warp Drive Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.