GrassStripFlyBoy Posted April 6, 2020 Report Share Posted April 6, 2020 A while back I attempted to obtain info from TruTrak on CT installation details for roll servo, and the type needed. BendixKing service replies where not helpful to say the least. I'm seeing used servos available from time to time, and want to pick up one when price is right, but also don't want to buy the wrong type. For roll, what is being used; DSB-B, DSB-C, etc.? I can figure out the install from there as I have support from GRT Avionics on my EFIS which will drive it, as well as mechanical side of attachments to airplane - but appreciate some insight on the servo I need to pick up. Thanks, Darrell Quote Link to comment Share on other sites More sharing options...
Garrett Gee Posted April 7, 2020 Report Share Posted April 7, 2020 I just pulled the Tru Trak system out of my 2010 CTLS and replaced it with the Dynon, and the Tru Trak roll servo model number is DSB BTOR. It is a torque enhancing model. Part number is 8100-010. Quote Link to comment Share on other sites More sharing options...
GrassStripFlyBoy Posted April 7, 2020 Author Report Share Posted April 7, 2020 Thanks for the info, now I need to cross check this with the SW applications, as I don't have the "heavier aileron" system of the LS and wonder if torque enhancing is needed. Quote Link to comment Share on other sites More sharing options...
Tom Baker Posted April 7, 2020 Report Share Posted April 7, 2020 A 2010 would not have had the heavy ailerons. Quote Link to comment Share on other sites More sharing options...
BravoFoxtrot Posted April 7, 2020 Report Share Posted April 7, 2020 The TruTrak packing list for my CTSW shows BS-B (servo motor Basic-B) and TORQ KIT; Torque Enhancer Kit. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.