AGLyme Posted September 28, 2020 Author Report Share Posted September 28, 2020 No, but that will be a good test. Will report back.. Thanks for the info. 35 minutes ago, Bill3558 said: turning at static full power run up Quote Link to comment Share on other sites More sharing options...
Tom Baker Posted September 28, 2020 Report Share Posted September 28, 2020 3 hours ago, Bill3558 said: Ag, do you know what rpms you were turning at static full power run up? I’m turning 5200. I think I’m about 200 over where I should be. 5200 is probably a little on the high side for static, assuming you have the Nueform propeller. Quote Link to comment Share on other sites More sharing options...
Roger Lee Posted September 29, 2020 Report Share Posted September 29, 2020 Believe it or not they were all very close except for the Warp Drive which suffered in climb compared to all the others. Quote Link to comment Share on other sites More sharing options...
FlyingMonkey Posted September 29, 2020 Report Share Posted September 29, 2020 15 hours ago, Roger Lee said: Believe it or not they were all very close except for the Warp Drive which suffered in climb compared to all the others. I wonder if that's a surface area thing, the chord of the Warpdrive is pretty short. It's also heavier though, so not sure. Quote Link to comment Share on other sites More sharing options...
Roger Lee Posted September 29, 2020 Report Share Posted September 29, 2020 It's a flat prop and like you said a short cord. Quote Link to comment Share on other sites More sharing options...
Isham Posted January 21, 2021 Report Share Posted January 21, 2021 Curious if I need to change my Neuform prop settings. I was surprised at the static RPM 5200. On takeoff roll it runs between 5000-5100. WOT cruise is 5600-5700. Seems like it is turning a little bit too high of RPM to me. Quote Link to comment Share on other sites More sharing options...
Tom Baker Posted January 22, 2021 Report Share Posted January 22, 2021 I would agree that is a little under pitched, at least to my liking. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.