procharger Posted May 25, 2021 Report Share Posted May 25, 2021 I used these plastic washers to fix slop in the flapper drilled to fit shaft split the one on other side in two halves and drilled to fit gorilla glued in place perfect holes better support with the plastic about 3/16 thick toilet flange repair kit for the washers worked out really well. Quote Link to comment Share on other sites More sharing options...
johnnyjr Posted May 26, 2021 Report Share Posted May 26, 2021 Just did mine during the condition inspection. I used brass bushings and oversized them. Secured with fortified epoxy to keep it all in place Not sure how long the plastic will hold up to the vibration. Keep us posted. Quote Link to comment Share on other sites More sharing options...
Roger Lee Posted May 26, 2021 Report Share Posted May 26, 2021 All I've ever done is epoxy washers on both sides. You can use metal or plastic washers you can get from Ace Hardware. Quote Link to comment Share on other sites More sharing options...
procharger Posted May 26, 2021 Author Report Share Posted May 26, 2021 Because they are thicker than metal washers I hope for long life. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.