Tommy Mc Posted January 28, 2022 Report Share Posted January 28, 2022 Hi People, Would anybody happen to know the correct Torque values for the 6 H mount mounting bolts for CT2K/CTSW? As I'm not sure of the composition of the bulkhead where the H mount bolts on I'm unsure of the setting to use. From my reading the manual it is either 18.5 NM or 22NM Thanks in advance. T Mc Quote Link to comment Share on other sites More sharing options...
Tom Baker Posted January 28, 2022 Report Share Posted January 28, 2022 I think your 22NM figure is about right. I use 200 in/lb. which is right in the ballpark. Quote Link to comment Share on other sites More sharing options...
Tommy Mc Posted January 29, 2022 Author Report Share Posted January 29, 2022 Thanks Tom Quote Link to comment Share on other sites More sharing options...
Roger Lee Posted January 29, 2022 Report Share Posted January 29, 2022 22nm (200 in/lbs) is good to go. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.