DJ Todd B Posted August 7, 2023 Report Share Posted August 7, 2023 Does anyone know where I can get a smaller Carburetor intake clamp or what these type are called so i can find one for myself? The clamp "bottoms out" before it can tighten around the Carb Intake and continually pulls itself away from the airbox assembly. Quote Link to comment Share on other sites More sharing options...
Roger Lee Posted August 7, 2023 Report Share Posted August 7, 2023 It isn't a clamp issue. The rubber sleeve has been crushed too far. Just buy another rubber sleeve. Quote Link to comment Share on other sites More sharing options...
Anticept Posted August 8, 2023 Report Share Posted August 8, 2023 You may also wish to take a look at that adel clamp that is attached to the plenum in the background. I find that many of them are positioned poorly, and it likes to pull the plenum off the carbs, resulting in people overtightening trying to keep them from slipping off. It's good practice to loosen that clamp when doing carb work. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.