EricB Posted January 17 Report Share Posted January 17 Can anyone identify the "extra" little slot below the usual one in this picture? This is a 2008 CTLS. No other picture I've seen shows this slot and some otherwise knowledgeable people I've asked have not seen such an arrangement and could only speculate Quote Link to comment Share on other sites More sharing options...
Anticept Posted January 17 Report Share Posted January 17 Cabin heat and carb heat inlet. Your radiator needs adjusted too and a top baffle installed. A lot of the early CTLS didn't mount the radiator correctly and needs adjustment to the bottom mounting extension bar to bring it forward, though it might also hit the hoses. Quote Link to comment Share on other sites More sharing options...
Roger Lee Posted January 17 Report Share Posted January 17 Check and make sure the heater intake is aligned with the opening on the cowl. Quote Link to comment Share on other sites More sharing options...
Tom Baker Posted January 17 Report Share Posted January 17 I think I have only worked on one CT that did not have that slot. It was a Super Sport, and had a NACA duct on the cowling instead. Quote Link to comment Share on other sites More sharing options...
Tommy Mc Posted January 18 Report Share Posted January 18 This is on my CT2K. It is the air intake for the cabin heater.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.